Abedi, Mohsen
Investigation affect of fiber reinforced polymer (FRP) on stress carrying capacity of miter corner joint under diagonal tension loading [Volume 35, Issue 4, 2021, Pages 307-320]
Adab, Ali
Investigation of withdrawal resistance of reinforced T-shaped joint with fiber reinforced composites [Volume 35, Issue 3, 2020, Pages 294-305]
Afra, Elyas
Characterization of water-repellent cellulose paper and nanopaper using silane [Volume 35, Issue 1, 2020, Pages 22-32]
Azadfallah, Mohammad
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2021, Pages 376-391]
Azadi Boyaghchi, Mehrnaz
Evaluation of Performance of Enzruth Gum Extract in Removal of Stains Caused by Hand Contact from Historical Papers [Volume 35, Issue 2, 2020, Pages 152-164]
B
Barzagar, Shayan
In-situ loading of calcium silicate in bleached bagasse fibers and its effect on pulp and paper properties [Volume 35, Issue 3, 2020, Pages 246-258]
Baziyar, Behzad
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020, Pages 271-282]
Bazyar, Behzad
Assess the features of puplar plywood using lignin-glyoxal adhessive [Volume 35, Issue 2, 2020, Pages 127-137]
D
Dehghani Firouzabadi, Mohammadreza
Effect of coating type and grammage of printing paper on water drop contact angle over time [Volume 35, Issue 2, 2020, Pages 165-177]
E
Ebrahimpour Kasmani, Jafar
The effect of nanoclay contents on properties of WPC made of MDF and particleboard wastes with recycled polyethylene and polypropylene [Volume 35, Issue 1, 2020, Pages 1-10]
Efhamisisi, Davood
Fire resistance and mechanical properties of nano-wollastonite/styrene-treated poplar wood [Volume 35, Issue 1, 2020, Pages 46-60]
Efhamisisi, Davood
Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different species of Wood [Volume 35, Issue 1, 2020, Pages 88-101]
F
Familian, Hossein
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020, Pages 219-231]
Fatehi, Ehsan
Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards [Volume 35, Issue 1, 2020, Pages 76-87]
Fazeli, Anooshe
Effect of density and industrial wood particles to cement ratio on mechanical and physical properties of wood cement composites [Volume 35, Issue 4, 2021, Pages 362-375]
Firouzbehi, Farhod
Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different species of Wood [Volume 35, Issue 1, 2020, Pages 88-101]
G
Ghahri, Saman
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2021, Pages 392-406]
Golbabaei, Fardad
Investigation of composite of three layers of cement and ionolite [Volume 35, Issue 1, 2020, Pages 113-125]
Golbabaei, Fardad
Application of bagasse in composites nano-wollastonite-reinforced gypsum base structures [Volume 35, Issue 2, 2020, Pages 138-151]
Golbabaei, Fardad
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2021, Pages 392-406]
H
Habibi, Masoudreza
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020, Pages 219-231]
Hadjazi, Sahab
In-situ loading of calcium silicate in bleached bagasse fibers and its effect on pulp and paper properties [Volume 35, Issue 3, 2020, Pages 246-258]
Hajihassani, Reza
Investigation of composite of three layers of cement and ionolite [Volume 35, Issue 1, 2020, Pages 113-125]
Hajihassani, Reza
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2021, Pages 392-406]
Hamzeh, Yahya
Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different species of Wood [Volume 35, Issue 1, 2020, Pages 88-101]
Hamzeh, Yahya
In-situ loading of calcium silicate in bleached bagasse fibers and its effect on pulp and paper properties [Volume 35, Issue 3, 2020, Pages 246-258]
Hamzezadeh, Roghayeh
Fire resistance and mechanical properties of nano-wollastonite/styrene-treated poplar wood [Volume 35, Issue 1, 2020, Pages 46-60]
Hasanpoor tichi, Ai
Application of bagasse in composites nano-wollastonite-reinforced gypsum base structures [Volume 35, Issue 2, 2020, Pages 138-151]
Hemmasi, Amirhooman
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2021, Pages 376-391]
Hemmasi, Amir Hooman
Dynamic and static comparison of Dovetail , Tongue and Groove in Firs [Volume 35, Issue 1, 2020, Pages 33-45]
Hemmasi, Amir Hooman
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020, Pages 195-204]
Hossein, Mohammad Ali
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020, Pages 195-204]
I
Iron, Zeynab
Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards [Volume 35, Issue 1, 2020, Pages 76-87]
Izadyar, Soheila
In-situ loading of calcium silicate in bleached bagasse fibers and its effect on pulp and paper properties [Volume 35, Issue 3, 2020, Pages 246-258]
J
Jazayeri, Reza
Influence of modified graphite on formaldehyde emission from medium density fiberboard ( MDF) [Volume 35, Issue 4, 2021, Pages 348-361]
K
Kargarfard, Abolfazl
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2021, Pages 392-406]
Kargarfard, Abolfazl
Influence of modified graphite on formaldehyde emission from medium density fiberboard ( MDF) [Volume 35, Issue 4, 2021, Pages 348-361]
Khademi Eslam, Habibollah
Dynamic and static comparison of Dovetail , Tongue and Groove in Firs [Volume 35, Issue 1, 2020, Pages 33-45]
Khademi Eslam, Habibollah
Assess the features of puplar plywood using lignin-glyoxal adhessive [Volume 35, Issue 2, 2020, Pages 127-137]
Khademi Eslam, Habibollah
Application of bagasse in composites nano-wollastonite-reinforced gypsum base structures [Volume 35, Issue 2, 2020, Pages 138-151]
Khademi Eslam, Habibollah
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020, Pages 271-282]
Khorasani, Nematollah
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2021, Pages 376-391]
Khosravani, Amir
Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards [Volume 35, Issue 1, 2020, Pages 76-87]
Khosravani, Amir
The effect of electerical conductivity on the performance and interaction of cationic starch- anionic nanosilica in pulp slurry [Volume 35, Issue 1, 2020, Pages 102-112]
L
Lashgari, Amir
Dynamic and static comparison of Dovetail , Tongue and Groove in Firs [Volume 35, Issue 1, 2020, Pages 33-45]
M
Mahdavi, Saeed
The effect of nanoclay contents on properties of WPC made of MDF and particleboard wastes with recycled polyethylene and polypropylene [Volume 35, Issue 1, 2020, Pages 1-10]
Mahdavi, Saeed
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020, Pages 195-204]
Mahdavi, Saeed
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020, Pages 219-231]
Mahdavi, Saeed
Replacement of elemental chlorine-free (ECF) with the traditional method for bagasse soda pulp bleaching [Volume 35, Issue 3, 2020, Pages 259-270]
Malekian, Behrooz
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020, Pages 283-293]
Masoudifar, Masih
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020, Pages 283-293]
Mehranfar, Amir Hossein
The effect of electerical conductivity on the performance and interaction of cationic starch- anionic nanosilica in pulp slurry [Volume 35, Issue 1, 2020, Pages 102-112]
Mirshokraie, Seeyed Ahmad
Assess the features of puplar plywood using lignin-glyoxal adhessive [Volume 35, Issue 2, 2020, Pages 127-137]
Moeinaddini, Mazaher
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2021, Pages 376-391]
Mollaei, Masoumeh
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2021, Pages 376-391]
Mollahassani, Amir
Dynamic and static comparison of Dovetail , Tongue and Groove in Firs [Volume 35, Issue 1, 2020, Pages 33-45]
Mosavi Majd, Azita
Evaluation of Performance of Enzruth Gum Extract in Removal of Stains Caused by Hand Contact from Historical Papers [Volume 35, Issue 2, 2020, Pages 152-164]
N
Nemati Babaylou, Ali
Evaluation of Performance of Enzruth Gum Extract in Removal of Stains Caused by Hand Contact from Historical Papers [Volume 35, Issue 2, 2020, Pages 152-164]
Niromand, Farshid
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020, Pages 219-231]
Nourbakhsh, Amir
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2021, Pages 392-406]
Oladi, Reza
Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different species of Wood [Volume 35, Issue 1, 2020, Pages 88-101]
Omrani, Pantea
Investigation of withdrawal resistance of reinforced T-shaped joint with fiber reinforced composites [Volume 35, Issue 3, 2020, Pages 294-305]
OMRANI, PANTEA
Investigation affect of fiber reinforced polymer (FRP) on stress carrying capacity of miter corner joint under diagonal tension loading [Volume 35, Issue 4, 2021, Pages 307-320]
P
Pezeshki, Vahid
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020, Pages 219-231]
R
Rahmaninia, Mehdi
Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards [Volume 35, Issue 1, 2020, Pages 76-87]
Rahmaninia, Mehdi
The effect of electerical conductivity on the performance and interaction of cationic starch- anionic nanosilica in pulp slurry [Volume 35, Issue 1, 2020, Pages 102-112]
Rajabi Cham Heidari, Hosseinali
Changes in Chemical Structure and Hydrophobization of the Paulownia Wood
with Fluorocarbon Resin [Volume 35, Issue 2, 2020, Pages 178-194]
Rangavar, Hossein
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020, Pages 271-282]
Rasouli, Davood
Characterization of water-repellent cellulose paper and nanopaper using silane [Volume 35, Issue 1, 2020, Pages 22-32]
Resalati, Hossein
Effect of coating type and grammage of printing paper on water drop contact angle over time [Volume 35, Issue 2, 2020, Pages 165-177]
Resalati, Hossein
The dual function of chitosan on improving the retention of iron oxide nanoparticles and the mechanical strength of magnetic paper produced by in situ synthesis [Volume 35, Issue 2, 2020, Pages 205-217]
Resalati, Hossein
Use of magnetic nano bio composites prepared from fibers, nanocrystalline cellulose and carboxy methylcellulose in adsorption of heavy metals )Nickel and Lead( [Volume 35, Issue 4, 2021, Pages 332-347]
Rezvani, Mohammad Hadi
Changes in Chemical Structure and Hydrophobization of the Paulownia Wood
with Fluorocarbon Resin [Volume 35, Issue 2, 2020, Pages 178-194]
S
Salehi, Kamyar
Investigation of composite of three layers of cement and ionolite [Volume 35, Issue 1, 2020, Pages 113-125]
T
Tabei, Asghar
Investigation of composite of three layers of cement and ionolite [Volume 35, Issue 1, 2020, Pages 113-125]
Taghiyari, Hamid Reza
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020, Pages 271-282]
Talaei, Aisona
Changes in Chemical Structure and Hydrophobization of the Paulownia Wood
with Fluorocarbon Resin [Volume 35, Issue 2, 2020, Pages 178-194]
Talaeipoor, Mohammad
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020, Pages 195-204]
Talaei poor, Mohammad
Assess the features of puplar plywood using lignin-glyoxal adhessive [Volume 35, Issue 2, 2020, Pages 127-137]
V
Vaysi, Ramin
Effect of Nano-fibrillated Cellulose and Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp(CMP) [Volume 35, Issue 1, 2020, Pages 61-75]
Vaysi, Ramin
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020, Pages 283-293]
Y
Younesi, Habibollah
Influence of modified graphite on formaldehyde emission from medium density fiberboard ( MDF) [Volume 35, Issue 4, 2021, Pages 348-361]
Yousefi, Hossein
Characterization of water-repellent cellulose paper and nanopaper using silane [Volume 35, Issue 1, 2020, Pages 22-32]
Yousefi-golordi, Yousef
Effect of Nano-fibrillated Cellulose and Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp(CMP) [Volume 35, Issue 1, 2020, Pages 61-75]
Z
Zabihzadeh, Seyed Majid
The dual function of chitosan on improving the retention of iron oxide nanoparticles and the mechanical strength of magnetic paper produced by in situ synthesis [Volume 35, Issue 2, 2020, Pages 205-217]
Zabihzadeh, Seyed Majid
Use of magnetic nano bio composites prepared from fibers, nanocrystalline cellulose and carboxy methylcellulose in adsorption of heavy metals )Nickel and Lead( [Volume 35, Issue 4, 2021, Pages 332-347]
